Asztali pont- és dudorhegesztő gép (50 kVA, TE550 vezérlővel)

Katt rá a felnagyításhoz
Cikkszám: 130100-100
Elérhetőség: Raktáron
Main welder features
 Built-in compressed air filter unit.
 Electrodes speed control valves, shock absorber for end of stroke and air discharge
silencers assuring the minimum noise.
 Lubrication free pneumatic components to eliminates oil mist and to protect the
environment.
 Cylinder with chrome plated stem for heavy duty works and long life; adjustable
anti-rotation device.
 Cylinder with double stroke with key control.
 Water-cooled transformer, plates, electrode-holders and electrodes.
 Transformer with epoxy resin coated windings.
 TE550 constant current microprocessor control unit.Phase shift welding current
adjustment. Synchronous SCR contactor insulated from cooling water circuit with
protection thermostat.
 Two stage electric foot control for clamping and welding pieces only if correctly
positioned. The foot control is standard on spot welder models only (on request on
projection models).
 Pre-setting for additional double stage electric foot connection for the direct
recalling of welding program no.2.
 Two-hand safety control with timer for maximum safety, and removable key
selector, standard on all models. The push-buttons of the two hand control are
standard on projection models only (on request on spot welder models).

Leírás és Paraméterek

Spot welder yes
Projection welder -
Nominal power at 50% kVA 50
Maximum welding power kVA 110
Short circuit current kA 27
Maximum welding current on aluminium kA 24,5
Maximum welding current on steel kA 21,6
Thermal current 100% A 7000
No load secondary voltages V 5
Supply voltage 50Hz * V 400
Cables section L=30 m mm2 35
Delayed fuses A 100
Minimum gap mm 155
Maximum gap mm 285
Depth L mm 200
Depth D mm -
Max. electrode force (6 bar) daN 470
Maximum stroke mm 80
Double stroke - standard mm 60
Compressed air supply bar 6.5
Air for 1000 spots (6 bar) stroke 20 mm Nm3 2.6
max. stroke Nm3 8.7
Air supply hose mm 10
Water cooling l/min 6
Aerial noise produced dB(A) < 70
Measure conditions
working stroke mm 20
welding time cycles 14
welding current kA 20
working rating in welds/min 15
Net weight (approximately) kg 170

Szállítási díjak
10 kg-ig :  1.450 Ft+Áfa
15 kg-ig :  1.670 Ft+Áfa
30 kg-ig :  2.500 Ft+Áfa

Tovább a Vásárlási feltételek -ben